WDW series of computer-controlled electronic universal testing machine is mainly used for waterproofing materials, drawing all kinds of coatings and rubber materials, compression, testing and analysis of mechanical properties such as bending. Automatic strike ReH, ReL, Rp0.2, Fm, Rt0.5, Rt0.6, Rt0.65, Rt0.7, Rm, E and other test parameters, and according to GB, ISO, DIN, ASTM, JIS, etc. international standards for testing and to provide data. Features: This product uses high-intensity light beams and bars fixed on the work surface, so that they constitute a highly rigid portal frame structure. Imported inverter-driven motor driven by a drive mechanism moves up and down to move the bar to achieve test the loading process. Sub master this machine uses advanced DSCC-1 all-digital closed-loop control system for control and measurement, using computer test process and test curves dynamic display, and data processing, after the end of the trial by the graphics processing module for data reanalysis amplification curve editing, product performance reached the international advanced level of technical parameters: Name-post floorstanding electronic universal testing machine equipment specifications, models WDW series ± WDW biggest test of 100N ~ 100KN accuracy class 0.5, class load parameter test force measurement range 0.4% ~ 100% FS (full scale) Test Force showed the error of indication within 0.5% of the test force resolution of ± biggest test 1/300000, full, regardless of file, and the full resolution of large deformation parameters unchanged within the range of large deformation measurement ± 1% 10 ~ 800mm (optional) large deformation indication error indication of the large deformation measurement resolution of 0.008mm displacement parameters When ± displacement indication error indication within 0.2% displacement resolution 0.015μm force control rate control parameter adjustment range 0.005 ~ 5% FS / s the power control rate control accuracy rate <0.05% FS / s, the set value ± less than 2%, the rate of ≥0.05% FS / s, in order to within ± 0.5% of set value; when the strain rate adjustment range 0.005 ~ 5% FS / s deformation rate control accuracy rate <0.05% FS / s, the set value within ± 2%, the rate of ≥0.05% FS / s when, within ± 0.5% of the set value; test sets rate adjustment range 2 ~ 500mm / min test sets rate control accuracy is within ± 0.2% of the setpoint When Constant, constant deformation, constant displacement control range 0.5% ~ 100% FS Constant, constant deformation, constant displacement control accuracy setting value ≥10% FS, set value of ± 0.5%, the set value <10 When% FS, set value of ± 1% within the host parameters Dimensions 850 × 550 × 1680mm effective tension space (with stretch fixtures) 800mm effective compression space (including compression fixture) 800mm crosshead maximum distance 1100mm (excluding Fixture) effective test width 400 / 500mm Power 220V / 50Hz, ± 10% power 0.75KW, 105KW Weight 350,650Kg Features: 21, 22 free upgrade software in a timely manner, can guide the routine test, software upgrades, develop test programs for remote operation and troubleshooting 23, matching the four different range sensor 24, in order to better service for you before ordering customized test solutions, depending on the experimental materials for you to buy the appropriate models and fixtures, both can make The test machine machine to achieve the best results for the user but also a waste of time and cost.